Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Pin-out

  • Pin 1 will be the leftmost pin in a row, pin numbers will be based on cavity, ie. NC cavities count as a pin as well.

  • Each row of pins corresponds to one stalk

    • The top-most L shaped group above is a passthrough that’s not connected

Turn Signal

Top group in image, pins 1 and 6 are for left/right turn:

  • No turn - open

  • Right turn - 0.7kR

  • Left turn - 2.2kR

Cruise Control

Bottom group in image, pins 2 and 3 are for speed change, pins 6 and 7 are for set button

  • Speed up - 10.6kR

  • Slow down - 9.1kR

  • Neither - 16.7kR

Set button is a NO switch

Some other pin combinations for bottom group also show some resistances

  • stalk position “back” = stalk pushed away from the driver

Pin Combination

Resistance (kR)

Stalk position

1 & 4

0.20

All positions

2 & 7

8.38

Neutral

2.20

Up (Speed Up)

2.20

Up + Set Button

0.69

Down (Speed Down)

0.69

Down + Set Button

8.38

Back

3 & 7

8.4

Neutral