...
Compenent | Required Signal | Testing Board Reqiurement | Notes | ||
|---|---|---|---|---|---|
| 1 | 100uOhm Shunt Resistor | R1 (SENSE_2_P/SENSE_N) | Voltage fluctuation | Mimic the 100u shunt? | |
| 2 | R1-3/R1-4 | isoSPI to SPI (with LTC6820 chip) | Molex # MX150 con OR IN and IP holes | ||
| 3 | |||||
| 4 |
MSXIV_BMS_AFE_Rev_2
Compenent | Required Signal | Testing Board Reqiurement | Notes | ||
|---|---|---|---|---|---|
| 1 | THERMISTOR_CELL_x (0-9) | P8 | CONN R/A 12POS 3MM | ||
| 2 | THERMISTOR_CELL_x (10-29) | P7 | CONN R/A 20POS 3MM | ||
| 3 | CELL_INPUT_x (0-12) | P4 | CONN R/A 16POS 3MM | ||
| 4 | BAL_INPUT_x (0-12) | P3 | CONN R/A 14POS 3MM | ||
| 5 | From BMS Carrier | P1 | isoSPI | CONN 2POS DURA-CLIK 0.079" | |
| 6 | To next AFE | P2 | isoSPI | CONN 2POS DURA-CLIK 0.079" | |
| 7 |
MSXIV_
...
Center_Console_
...
Rev_2
Compenent | Required Signal | Testing Board Reqiurement | Notes | ||
|---|---|---|---|---|---|
| 1 | Input/Output for LED | P1 | Test debouncing/schmitt range | CONN 12POS MICRO-FIT 3mm | Hazard_btn/led |
| 2 | Neutral/Drive/Reverse/Power btn and LED | P3 | Test debouncing/schmitt range | CONN 16POS MICRO-FIT 3mm | |
| 3 | BPS_LED | P5 | CONN 2POS MICRO-FIT 3mm | ||
| 4 | Fan | P2 | Fan freq | CONN 3POS MICROFIT |
MSXIV_SteeringWheelInterfaceBoard
Compenent | Required Signal | Testing Board Reqiurement | Notes | ||
|---|---|---|---|---|---|
| 1 | P2 | CONN 5POS VERT Micro-fit 3MM | |||
| 2 | P3 | ||||
| 3 | P5 | ||||
| 4 | Steering Stalk? |
MSXIV_BMS_Carrier_Board_Rev_2.1
-UV cutoff
-Controller Board
-Centre Console
-Steering Interface
-Power Distribution
-Power Select