Assembly instructions for the tie rod, centerlink assembly and steering arm.
...
BOM
Number | Part Name | Quantity | Assembly |
|---|---|---|---|
1 | Centerlink Assembly | 1 | |
2 | Tie rod Assembly | 1 | |
3 | Steering arm assembly | 1 | |
4 | 2mm ring shim (98089A441) | 2 | |
5 | M8 x 1.25-35 SHCS | 2 | |
6 | M8 Nylon Locknut | 2 |
...
Instructions
Tie rod to centerlink assembly:
Insert the two ring shims (Part #4) and the tie rod (Part #2) into the centerlink assembly (Part #1) as shown. Ensure that the holes of the centerlink assembly, shims and the tie rod bearing align. Note that the tie rod rests between the 2 shims.
...
Front view of the assembly. Centerlink assembly is transparent to see the location of the shims.
2. Insert the screw (Part #5) into the hole of #1. Put the nylon nut (Part #6) into the threads of #5 and tighten.
...
Front view of the tightened screw and nut.
Tie rod to steering arm:
3. Position the steering arm (Part #3) by aligning its hole with the hole of the tie rod bearing.
...
Top view of the steering arm in position.
4. Insert the screw into the hole of #3. Put the nylon nut onto the threads of #5 and tighten.
...
Side view of the tightened screw and nut.
5. Repeat on the other side.
Done 