Versions Compared

Version Old Version 1 New Version Current
Changes made by

Emily Guo

Emily Guo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Subassembly instructions for tie rod in the steering assembly.

...

BOM

Number

Part Name

Qty

1

MSXIV-STR002-Tie rod

1

2

Thrust rated rod ends M8 (8411K12)

2

3

MSXIV-STR012-TR TUBE END

2

4

M8 lock nut

2

...

Instructions

Info

2x Tie Rod subassemblies required for steering assembly.

...

    ...

    Filter by label (Content by label)
    showLabelsfalse
    max5
    spacescom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@240bfd
    showSpacefalse
    sortmodified
    typepage
    reversetrue
    labelskb-how-to-article
    cqllabel = "kb-how-to-article" and type = "page" and space = "MECH"

    ...

    hiddentrue

    ...

    1. Rod ends:
      Put #4 onto the threads of #2 with the flat side facing away from the bearing. Twist the nut till approx 14mm from the end of the thread, do not tighten.

      Image Added

      Image Added

    2. Thread the rod end onto #3, adjust the #2,4 and 3 until there is one thread to the left of the nut, then tighten the nut onto the tube side (highlighted). Repeat this for the other tie rod.

      Image Added

      Image Added

    3. Follow the Tube End Welding Jig assembly instructions to weld the tube to the rod ends.

      1. The highlighted faces are to be welded.

        Image Added

      2. #1 is transparent to show the welded assembly.

        Image Added

    4. Repeat for one more tie rod (smile)