...
Responsibilities
| Person | Location |
|---|
| Order Responsibility (PCBs) |
| TBD |
|---|
| Order Responsibility (Components) |
| DigikeyDigikey/Mouser (send cart links to UW procurement) |
|---|
Boards
| Board Sent | Rev | Person Responsible | Layers | Color | Gerber File (upload as Zip) | BOM (xlsx) | Octopart/Digikey/Mouser BOM link | #Boards to purchase components for | Stencil (None/Regular/Framed) | Note | MSXIV BMS Carrier | 1.1 |
|---|
| 2 | BlueLights Driver Board |
| Pei | 2 | Green | | View file |
|---|
| name | Fabrication FilesLightsDriver_4.0.zip |
|---|
| height | 250 |
|---|
|
| Forgot to send in Dec | MSXII Precharge/MCI | 5.0 | | 2 | Black | Motor_Interface_PreCharge_Rev5zip | 0 (Already Purchased) | Forgot to send in Dec | MSXIV Solar Master/Sense |
| 1 | .0 | Black | 1 | MSXIV BMS AFE | 1.0 | | 4 | Blue | Only top; regular | Contains new resistors and capacitors |
|---|
| Lights LED Board |
| Pei | 2 | Green | Fabrication Files (1)| LEDLights_4.0.zip | | height | 250 |
|---|
|
| MSXIV Center Console | 1.0 | | 2 | Green | | View file |
|---|
| name | Center ConsoleLEDLights_34.0.zipxlsx |
|---|
| height | 250 |
|---|
|
|
| 1 | Sending the same board as last time (ordering 5) because nothing actually changed other than labeling of 2 nets. The PCB layout was messed up because after ordering the boards last term, the files were pushed to git but the pcb layout wasn't saved properly and thus looks incomplete. | MSXIV Power Distribution Front | 1.0 | | Red | 1 | Controller Board Panel | GreenOnly top; regular |
|
|---|
| Current Sense | 2.0 | Liam | 2 | Blue | | View file |
|---|
| name | ControllerBMS_BoardCurrent_PanelSense_Gerber.zip |
|---|
| height | 250 |
|---|
|
| 24 | Each panel has 6 controller boards. The pick and place files are on the branch for now. | Lights Board | White | n/a | 7 | Boards already purchased, need other current limiting resistor values, and LED colors - ask Nita |
|---|
| Name | Digikey PN | QTY |
|---|
| U.FL-LP Connector for current sense. | H125222-ND | 2 |
Other Notes
We should not need to purchase any additional resistors/capacitors unless they are new to the library.
...