...
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Navigate into the project output folder, which is created in the same directory where you have saved the project file. You will need to select the gerber files you made plus and the NC Drill file you made, as well as a text file similar to the one indicated. This text file holds coordinates for drilling holes in the board and is important to include in the items to be sent to the manufacturers. Then add these items to an archive.'ve made according to [Manufacturer Name Here]. You may have to zip these files before sending them to the manufacturer. You should name the archive the same name as the PCB.
Or alternatively, you could do this:
Step 11
You should name the archive the same name that you have silkscreened onto your PCB. It will need to be a zip file with normal compression.
...
Remarks
...
