Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Time

Item

Presenter

Notes

Mechanical (Aerbody)

Shalin Patel

  • Completed

    • Windshield

    • Headlights

    • Doors Cut Out

  • Fairings

  • Lights need to be finalized - driven by aerobody

  • Solar Cells Placement

  • Space for brake lights, strobe lights

  • Camera sizes/types TBD - dependent on requirements and angles

  • Integrate Aeropanels and rolling chassis by EOT


Electrical

Taiping Li

  • Antenna mounting - interiors

  • Dash/Windshield are removable to access the inside (e.g. lights, antenna)

  • Headlights - will be mounted to the aerobody

    • Considerations: removable - will not be waterproof.

    • Build assembly for headlights

  • Trunk/Bottom

    • Rear lights - Light bonded with aero with board behind

      • Note: must be approved by WSC requirements (even if made in-house)

      • Design cut out

    • Camera

      • Regulations: must be able to see right behind

      • Placement? Side panel? Directly behind?

  • Rear

    • Roof will be removable, back roof can be hinged but also removed

    • Battery box: aim for making modular parts for items within the battery to be removable

      • Should be removed very rarely - otherwise will figure out during then. Should not change design

  • Arrays

    • Laminate existing array and measure thickness - measurement to make arrays flush against surface

    • Feasibility of cells - determine module layout

    • Removability of Solar Panels

  • Water Resistance

    • Proper flanges to ensure water proofing against rain

    • Top will be guaranteed

  • Side

    • Charging port: Considerations for accessibility,

    • Kill Switch: must be flush

    • Blind Spot Cameras: side

    • Side Signals: Obtain lights then design cut out

  • Ventilation

    • Driver, passengers/rear passengers

      • have fans built

    • Battery Box outtake routed through rear wheel wells

    • Electrical component cooling: Needs to be considered

    • Array Cooling: cut outs on aerobody

Misc.

  • Tow Hook

    • Need to confirm with scrutineers if windshield can be hinged up

  • Motors Cooling

  • Fairing Size to Access wheel - may be extended

  • Consideration: Angle the ducts for battery that will not allow backflow of water from the rear wheels

Action items

  •  Discuss Fairings
  •  Lights, Cameras
  •  Electrical Component Cooling
  •  Charging port location

Decisions