Page Comparison

...

1. Steel chassis
2. Composite catamaran
3. Impact objects (All 13 impact objects should be combined into one file for convenience)

ANSYS

...

1. Image Removed

...

1. Here, all of the impact objects are combined in one model. In the simulations, we will suppress the unneeded objects instead of having a separate model for each object.
2. Image Removed

...

1. Image Removed

...

1. In this picture we can see that the front portion of the chassis has been connected to the front panel of the catamaran
2. Image Removed

...

1. I added a contact region between the bottom edge of the chassis to the edge of the catamaran
2. Image Removed

...

1. Your workbench should now have 2 mechanical models, one with the chassis and the catamaran, the other with the impact objects
2. Image Removed

...

1. Image Removed
2. You will have all of the impact objects in your model, just suppress the impact objects that you do not need

...

**In development (02/13/2019)**