...
Test at different current loads and modulate to see if there's any issues
(need to make a plan for this)Tools:
Load Tester
Oscilloscope
Procedure
Set Load Tester to CC mode, and set to 1-5A to test
Use oscilloscope at output
See and note voltage regulation (+/- 10%)
Comment any discrepancies
(Load-Tester in CC mode, measure voltage ripple and see voltage regulation(+/- 10% perhaps?)
Input Amperage | Voltage Regulation |
|---|---|
1A | |
2A | |
3A | |
4A |
Overall everything can be tested and Recorded through:
...