...
Two calculations for resin:
square inches per ply * (1/144) * type of material you are using * # of plies used
square inches per ply * (1/1296) * type of material you are using * # of plies used
general rule is to give core a buffer of 10%, and for all-else a buffer of 10%
good to perform a gel-test with a small amount of resin to see how fast the gel runs-through
Male versus Female Mold:
Male molds are better for when you want the out-side of your part to look nice, for example for the aero of the car ________
Record the temperature before-and-after bonding