Component(s) | Assigned To | Part Number + Link | Reasoning / Notes |
|---|---|---|---|
Current Sensing Resistor | Yes needed, since it would be nice to limit the current. Shunt resistor must be rated to trip at 35mV (datasheet) at current limit (6A) | ||
Voltage Divider Network | Spec to 12.5V - 13V | ||
Secondary Rectifying Fet | |||
Rectifying Diodes | |||
Primary Clamp Cap | Bottlenecked by measuring primary leakage inductance | ||
Primary Overvoltage Zener | Not needed because all of BMS exists and the IC is rated for like >>200 V | ||
Secondary Overvoltage Zener | 1.25*Vout - | ||
Output Caps | https://www.digikey.ca/en/products/detail/cornell-dubilier-knowles/SLP153M025C4P3/1881947 https://www.digikey.ca/en/products/detail/samsung-electro-mechanics/CL21A226MAYNNNE/10479857 | Copy from old DCDC :)))) | |
BPP Cap | Done | ||
U/OV Protection | Done | ||
Secondary Bypass Pin Cap | Done | ||
FWD Pin Resistor | Done | ||
...