...
There was an erroneous drill hole at (x, y) (14.75, 58.25)mm, shorting both 12V fused and gnd
Resolution: Drill out the via, luckily there are no nearby traces/components
Missing holes at (13.25, 55.25) and (13.85, 54.4), which are the A and B supplies for DCDC power path U5B
Resolution: Solder jumper wires
Rev 1.1
It was found that the 5V buck ICs were damaged (shorted) when testing the OVP. As such, the OVP was lowered from 15 to 14V. The aux battery when fully charged settles over time to ~13.75V so it should still be okay.
Wack vias were fixed by regenerating NC drill files