| Validation Steps | Status | Blockers |
|---|
Outputs | - Verify Operation of Load switches using bts_load_switch driver Adhiraj Singh
- Verify Operation of Outputs using Output Config Adhiraj Singh
- Verify current readings
- Verify multiplexor with current readings
- Trigger Undervoltage/overvoltage conditions, see if it triggers interrupt (do after everything else in case board explodes)
| | |
Output Read verification | - Verify Outputs are successfully read in main loop
| | Need gpio expanders verified |
Lights FSM verification | - Verify by setting can messages internally
- Verify by sending can messages over PEAK CAN
| | Need all previous verified |
Power FSM Verification | - Verify by setting can messages internally
- Verify by sending can messages over PEAK CAN
| | Need all previous verified |