...

Component designators have largely been omitted from the layout due to space constraints. The usefulness of designators decreases with increasing board size, as having “C57” among hundreds of 0603 parts does not make it easier to find. Eventually the “Top Designator” layer will be updated with all designators so that they are included in the PDF export.

Change Log

Rev 1.0

Somehow the NC drill file got messed up

• There was an erroneous drill hole at (x, y) (14.75, 58.25)mm, shorting both 12V fused and gnd

  • Resolution: Drill out the via, luckily there are no nearby traces/components

• Missing holes at (13.25, 55.25) and (13.85, 54.4), which are the A and B supplies for DCDC power path U5B

  • Resolution: Solder jumper wires