Versions Compared

Version Old Version 5 New Version 6
Changes made by

Michael Turco

Nathan Roberts

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Total cost for 1 FSU (not acounting for cost reduction due to quantity): $211.59

...

Expand
titleRequires: off the shelf modification, shoulder bolt, bushing, castle nut and washers

Off the shelf modification:

25.4mm bushings need to be cut into two 10mm bushings

Shoulder bolt: Thread length too small, need longer bolt

94361A119 - https://www.mcmaster.com/94361A119/:

  • $7.54

  • 10-32 thread

  • 50.8mm long (2inches)

  • Required length is 51mm so 0.2mm of threads would be under preasure

Bushing

6381K42 - https://www.mcmaster.com/6381K42/:

  • $5.30

  • 6.35 → 9.525mm conversion (1/4 → 3/8 inches)

  • 25.4mm long (1 inch)

  • Needs to be cut into two 10mm parts

...

Expand
titleRequires: slight part modification, off the shelf modification, shoulder bolt, bushing, castle nut and washers

Part modification:

Clevis needs its bolt hole diameter decreased to 12mm where it connects to the shock. Nate already had the sim for this part set up so its been resimed and passes with the new diameter.

Shoulder bolt:

92981A430 - https://www.mcmaster.com/92981A430/:

  • $5.30

  • M10

Required Washer:

??? - ??:

  • ?

Shock to Wheel Set: (total cost: $45.05)

...

Expand
titleRequires: M10, M8, 10-32

M8: x1 (need 1 per wheel)

93760A222 - https://www.mcmaster.com/93760A222/:

  • $3.52 pkg. 5

M10: x1 (need 5 per wheel)

93760A233 - https://www.mcmaster.com/93760A233/:

  • $6.87 pkg. 5

10-32: x1 (need 2 per wheel) Does not work for 10-32 bolt

91853A510 - https://www.mcmaster.com/91853A510/:

  • $11.15 pkg. 5

...