Purpose

Balance cells

Thermistor

Connection

Low side because blah

Power Supply

Powered off 3V0 VREF2 supply from LT6811. Estimated current consumption for 8x thermistors (10k pullup + 3k thermistor @ 60C) is 1.84mA. VREF2 is expected to droop < 400ppm, which will cause 400ppm error, well within the acceptable range for temperature measurements. VREF2 is only used to drive thermistors, the internal ADC is referenced off VREF1.

...

What is this page for?: The purpose of this page is to serve as a location to research and determine ways in which the BMS AFEs can be improved for MSXV.

...