...
-May need to add counterbores for the screw holes.
-Please verify if my fixtures are valid.(11-23-2023) Reduced the thickness of the base and fillets in order to fix a clearance issue
Material: 6061-T6 Aluminum, Yield Strength: 2.750E8 N/m^2.
...
1.3 kN directed 6.9 degrees below the horizontal but multiplied by 2 as a safety factor
...
Mesh:
...
Results:
...
Note: Just for reference, the force is directed to the left in this image.Reducing the thickness of the base moved the point of least stress from the base to the corner of the mount
Next Steps: Can probably cut off chunks of material in order to reduce weight
...