Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Type

Part

Used For

QTY

Location/Mounting Method

Battery

Battery Module

  • Makes up the main pack

  • 9 modules in series, each module is 4S8P, each cell is a 21700 LG M50T battery

9

Bolted to the bottom of the enclosure, 2 bolts for each module (diagonal holes).

AUX Battery

  • Back-up batteries for power-up sequence and in case main pack fails

  • Heat shrunk 10S1P, each cell is a NiMH battery.

1

Inside a separate 3D printed box. Box itself is secured on top of the long air baffle.

Boards

AFE

  • Handles interactions with main pack

  • Reads cell voltages & temperatures.

  • Performs load balancing

3

Mounted on top of three modules using bolts (using heat set inserts on the modules).

Current Sense

  • Reads pack current

1

BMS Carrier

  • Brain of the BMS system. Logs voltage, current, temperature, triggers BMS switch.

  • Used for SOC model

  • Watches our for overvoltage, overcurrent, undervoltage, undercurrent

1

DCDC

  • Converts pack voltage (HV) to voltage usable for low voltage electrical components (like fans, boards, lights, horn, etc.)

1

Mounted on top of a module using an adapter plate. DCDC goes onto adapter plate, adapter plate goes onto the module.

Main Power Switch

Main Pack Relay

  • Electrically isolates battery pack

  • Part of Main Power Switch (as defined by ASC)

2

Solar Relay

  • Electrically isolates battery pack

  • Part of Main Power Switch (as defined by ASC)

1

Fuse

Main Fuse

  • Protects components in case of current surge

1

Cooling Components

Noctua NF-F12 IPPC 3000 Fans

  • Cooling main pack (hopefully)

2

Air Baffles

  • Three types of air baffles

  • Prevents airflow going over the modules

4

Diagonal Support

  • Two types of diagonal supports (Left-Side and Right-Side)

  • Props up air baffles

4

Inlet

  • 3D Printed inlet for connecting to air duct

2

Outlet/Fan Holders

  • 3D Printed outlet for holding outlet fans

2

Connector

Molex MX150L 10 Circuit Panel Mount Plug

(MFG. P/N: 194290014)

  • For LV connections including boards & AUX

  • Only 7 in use

1

Molex MX150L 6 Circuit Panel Mount Plug

(MFG. P/N: 194290028)

  • For HV connection to solar

  • Only 2 in use

1

SB120 Anderson Connector

(MFG. P/N: 6810G1-BK)

  • For HV connection to motor

1

...