Page Comparison

Expand

title	Meeting Minutes 2023/11/07

Timelining

Mockup creation: Feb - Mar/Apr

Functional Testing: Apr - May

Parameter	Source	Condition	Action
Cell Voltage	BMS AFE - LTC6811	One cell group falls under: 2.5V	BPS Fault Minor
		One cell group rises above: 4.25V	BPS Fault Major
		One cell group is imbalanced by greater than 0.5V	BPS Fault Major
Pack Current	BMS Current Sense - MAX17261	Pack current rises above 58.2A	BPS Fault Minor
		Pack current falls below -27.08A	BPS Fault Minor
Cell Temperature	BMS AFE - LTC6811 (cell + ambient) BMS Current Sense - MAX17261 (cell)	Ambient temperature rises above xxC	BPS Fault Major
		Cell temperature rises above xxC	BPS Fault Major
Pre-charge time	BMS Carrier CB	Pre-charge takes too long	Failure to complete state transition, err code on display
Lose BMS	Power Distribution	BMS hard fault	Shut down BMS AUX power to cut relays, keep BMS DCDC power on for fans

Relays open (one IO per relay):
- Main relay pos
- Main relay neg
- Pre-charge relay
- Solar relay
BPS Strobe External
BPS Indicator Center Console
Cut MCI
- Send message to PD to disable MCI LS, in the event that regen was commanded to prevent it from keeping the HV bus energized
Display error code on centre console

Expand

title	Meeting Minutes 2023/09/20

https://docs.google.com/document/d/1dxwS8P7276XU3a09O-ceaUvEBJdM0MLSxGR7zkgU4GE/edit
Similar level of detail to MSXIV which got accepted, should be okay
Still need to adjust test cases for current draw for smaller pack

...