...
created + cleaned up MSXV Electrical Mockup Connections google sheet
Hardware Board Enclosures review
harnessing sheaths
combine common wires (i.e. GND) and splice them OR keep each wire separate but in common “casings”
FRONT ENCLOSURE TO REAR/BATTERY/CANOPY
run from sides following chassis tubes
REAR/BATTERY TO CANOPY
wiring needs to not restrict opening of canopy
Proposed path: Rear → Front → Rear (on side of canopy) → canopy
REAR/BATTERY TO TAIL
most direct path
UPDATE 28/08/2023: battery box ports will likely be on top of the front of our enclosure and maybe one or so on the lid for the AFEs
TO-DO:
work on PD/BMS portion of MSXV Elec Connections Google Sheet
remember to spec out wire gauges + length estimations!
Battery Enclosure Circuits
LV:
Pin | Name | Average Current | Peak Current (500ms) |
|---|---|---|---|
1 | DCDC + | 2 | 4 |
2 | GND | 2 | 4 |
3 | AUX + | 2 | 4 |
4 | BMS DCDC + | 0.5 | 3 |
5 | BMS AUX + | 0.5 | 3 |
6 | BMS CANH | 0 | 0 |
7 | BMS CANL | 0 | 0 |
8 | Spare |
...