Versions Compared

Version Old Version 2 New Version 3
Changes made by

Mitchell Langdon Ostler

Mitchell Langdon Ostler

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Validation Steps

Status

Blockers

Outputs

  •  Verify Operation of IO expanders using smoke test
  •  Verify Operation of Load switches using bts_load_switch driver
  •  Verify Operation of Outputs using Output Config

Status
titleIn Progress

  • Need output config merged for last verification

Fan Controllers

  •  Develop Smoke Test
  •  General hardware verification of Fan Controllers

Status
titleIn Progress

Output Read verification

  •  Verify Outputs are successfully read in main loop

Status
colourRed
titleBlocked

Need gpio expanders verified

Lights FSM verification

  •  Verify by setting can messages internally
  •  Verify by sending can messages over PEAK CAN

Status
colourRed
titleBlocked

Need all previous verified

Power FSM Verification

  •  Verify by setting can messages internally
  •  Verify by sending can messages over PEAK CAN

Status
colourRed
titleBlocked

Need all previous verified

Telemetry

Validation Steps

Status

Blockers

HC-12

  •  Develop basic tooling and verify connection/data transfer

Status
titleIn Progress

Need output config merged for last verification

Getting hardware

LoFa

  •  Develop basic tooling and verify connection/data transfer

...

Validation Steps

Status

Blockers

Load Switch

  •  Check that load switches work, and isense can be read

Status
titleIn Progress

Need output config merged for last verification

VBAT_Status

  •  Trigger Undervoltage conditions, see if it triggers interrupt.

...