The UCA
Expand | ||
---|---|---|
| ||
Model Version: 8.09.2 with the Weld Bead Configuration Material: AISI 4130 steel, annealed at 865C Yield Strength: 460 MPa Validation: June 19th 20th 2023 |
...
Fixtures
Expand | ||
---|---|---|
| ||
(Pic) Note: there are “dummy screws” inserted to simulate the potential interactions between the UCA parts and the screws the Jens method
|
Loading
Expand | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||
Fx & Fy:
Fz:
Loading Cases
|
...
Expand | ||
---|---|---|
| ||
|
Simulation Results
Expand | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Any section in Red is greater than the Yield Strength (460 MPa)The part will always be oriented to show the point of max stress
|
Reccomendations
...
|
Reccomendations
The part sees the highest stress concentrations at the edges near the bearing adapters and the bearing housing on the back, but never in the larger plate section in the middle. Material can probably be removed there and added near sharper corners to strengthen the part.