Page Comparison

...

https://www.youtube.com/watch?v=zgHlUwgiARo&ab_channel=ElectricVehiclesSpace

Here is how to arrange the cells to make a battery pack | ELECTRICBIKE.COM,

module testing stuff:

Learn the Fundamentals of Battery Module and Pack Test - YouTube

...

1. Verify battery regulations and our pack spec | June 2nd (KOSTUBH)

2. Assemble v7 | June 16th

   1. To do list:

      1. Find spot welder

      2. Find thermistors + any microcontroller/arduino

         1. Scope out how to connect

         2. Maybe find micahs board

      3. Thermistors on cells → find board to hook up thermistors

      4. Put on the nickel strips

   2. Spot-weld nickel strips

   3. Add voltage taps (figure out how quantity, and where)

      1. on cells for SoC algo testing

      2. on groups for balancing

   4. Thermistor placement, quantity (we need to iterate, I don’t think the plan below is good)
      Module Testing Wiring Schematic - Google Slides

   5. : need to source all the components listed above

3. Testing procedure | June 30th

   1. DAQ setup

   2. Charge/DIscharge profiles

4. CAD Module Iteration | July 14th

5. Build v8 | July 21st

6. Test | July 28th

7. TBD

Notes / Documentation:

...