...
Switching Circuit[Not Choosing This. Prefer Hall Effect Current Sensor]Remove DC-DC[Using different change]Remove all isolated 12V connectionReplace with VBAT
Replace HV FET with solid-state relays[May not implement. No big advantages for changes]Q1 and Q2 system to be entirely replaced with solid-state relaysEnd changesOne end from HV_INOther end to pre-chargeiso_latch_out might be removed?
Links
Part SearchNeed 150Vhttps://www.digikey.ca/en/products/detail/bright-toward-industrial-co-ltd/AA58F/143025591700V?120mA
https://www.digikey.ca/en/products/detail/panasonic-electric-works/AQY414SX/512420400V100mA
https://www.digikey.ca/en/products/detail/panasonic-electric-works/AQW210EHAX/512337350V120mAPreferring This One
https://www.digikey.ca/en/products/detail/panasonic-electric-works/AQV257AX/646155200V250mA
Add Hall Effect Current Sensor[Too complex to do in small time frame]Remove entire middle section with Hall Effect Current SensorMust connect to IN+ and IN-Unsure if AND gate and MOSFETs need to be changed
LinksPart searchCheck ratings (Current, voltage, sensitivity)CurrentVoltage120V?
Sensitivity[Check]
https://www.ti.com/lit/an/slia086a/slia086a.pdf?ts=1647014926239Part listhttps://www.digikey.ca/en/products/detail/allegro-microsystems/ACS756SCB-050B-PFF-T/540076050ANo Stock :/
https://www.digikey.ca/en/products/detail/lem-usa-inc/HO-8-NP-0000/43319748ANo Sensitivity
https://www.digikey.ca/en/products/detail/tamura/L08P100D15/529421100ANo Sensitivity
https://www.digikey.ca/en/products/detail/tamura/L01Z200S05/529408200ANo Sensitivity
https://www.digikey.ca/en/products/detail/texas-instruments/TMCS1101A1BQDRQ1/1463403745A50 mV/A
https://www.digikey.ca/en/products/detail/texas-instruments/TMCS1100A4QDR/12696002A?400 mV/A
Simplify Isolated DCDC
U4
Original
Charge pump switch regulator
https://www.digikey.ca/en/products/detail/microchip-technology/tc7662beoa713/418710
New Change
Use synchronous boost converter?
U5
Original
New Change
https://electronics.stackexchange.com/questions/582157/alternative-to-optocoupler-in-circuit-design
Inductive coupler
RF coupler
Capacitive coupler
U9
Original
New Change
Smaller changes
Removing:
Fan control
Remove fan connector
Remove entire fan control sheet
Thermistor
Remove thermistor connector
Remove entire thermistor sheet
Add jumpers near AND gate to skip it
...