...
Research Summary
Switching Circuit [Need ResearchNot Choosing This. Prefer Hall Effect Current Sensor]
Remove DC-DC
Remove all isolated 12V connection
Replace with VBAT
Replace HV FET with solid-state relays [Need Research]
Q1 and Q2 system to be entirely replaced with solid-state relays
End changes
One end from HV_IN
Other end to pre-charge
iso_latch_out might be removed?
Links
Part Search
Need 150V
https://www.digikey.ca/en/products/detail/bright-toward-industrial-co-ltd/AA58F/14302559
1700V?
120mA
https://www.digikey.ca/en/products/detail/panasonic-electric-works/AQY414SX/512420
400V
100mA
https://www.digikey.ca/en/products/detail/panasonic-electric-works/AQW210EHAX/512337
350V
120mA
Preferring This One
https://www.digikey.ca/en/products/detail/panasonic-electric-works/AQV257AX/646155
200V
250mA
Add Hall Effect Current Sensor [Need Research]
Remove entire middle section with Hall Effect Current Sensor
Must connect to IN+ and IN-
Unsure if AND gate and MOSFETs need to be changed
Links
Part search
Check ratings (Current and voltage)
https://www.digikey.ca/en/products/detail/allegro-microsystems/ACS756SCB-050B-PFF-T/5400760
50A
Preferring This One
https://www.digikey.ca/en/products/detail/lem-usa-inc/HO-8-NP-0000/4331974
8A
https://www.digikey.ca/en/products/detail/tamura/L08P100D15/529421
100A
https://www.digikey.ca/en/products/detail/tamura/L01Z200S05/529408
200A
Smaller changes
Removing:
Fan control
Remove fan connector
Remove entire fan control sheet
Thermistor
Remove thermistor connector
Remove entire thermistor sheet
Add jumpers near AND gate to skip it
...