This page contains research into updating the lights boards for MSXV.
Main Considerations
Number of driver boards (try to minimize this and keep it to 1-2)
Making sure that the lights come on (part of regulations)
Aesthetics count for points
Potential Ideas
https://youtu.be/oFdsiRMZZWk?t=145
Rough Sample Nita made
There are some RC filters which delay the "ON" signal sent from power distribution, making the voltage on each of the nodes increase one after the other (you can see on the probes). The NMOS should be on each node but is just on one for illustration. the diode models an LED (which would be technically on another board - space might be constrained so we have separate boards for driver + LEDs)
...