Trying to remove (suppress) all added gussets.
Update from 10.6: unsuppressed gussets where they failed.
| Table of Contents |
|---|
Folder Path:
D:\Users\Roo\Documents\GrabCAD\MSXIV sims\MS-CHASSIS\Spring 2021 Reinforcement Sims
File Name:
October 13_Rev10.6
This project file was created using Rev 10.6 as the base project.
Updates from Rev 10.1:
The sheet metal width was reduced so that it was about as wide as the catamaran tubes.
Front Bar - PASS
Back Bar - PASS
Side 30 Wall - PASS
Side 60 Wall - PASS
A-Pillar - PASS
B-Pillar - PASS
C-Pillar - PASS
Front 30 Wall - PASS
Front 60 Wall - PASS
Top 60 - PASS
Top 30 - PASS
Top - FAIL
Combined Loading (Roll-Over) - Incomplete
It is the case with the pucks.
It needs to be setup using previous examples.
Advisor: Jason He
It is slightly lower priority because the combined loading condition could be interpreted as an average of multiple cases listed above.