...
Back Bar - Passes
Side 30 Wall - Passes
Side 60 Wall - Passes now 2021.09.27
...
I checked the CAD and it seems to be setup properly. I’m not too sure why it shows high stresses here.
It might be because the front bottom tube is 1.75in height and causes weird behaviour at the tip of the short vertical tube?
Try to extend the short vertical tube past the front bottom tube (1.75in) in spaceclaim?
...
B Pillar - Passes
C Pillar - Passes
Front 30 Wall - Passes Now 2021.09.28
...
^This is a bottom view by the way.
...
Next Iteration: Add bigger gusset by enlarging it in spaceclaim.
...
It worked hoho.
Front 60 Wall - Passes now 2021.09.27
...
Gussets were added. Stress did not change at all.
...