| Table of Contents |
|---|
Introduction
...
Max Combined Stress (MPa) | ||
Scenario | Fixed Object | Fixed Chassis |
B-Pillar | 351.49 | 304.86 |
Side 60 | 648.65 | 1226.8 |
Top 30 | 1374.9 | 1667.6 |
...
Rev 5.0 - Longitudinal Reinforcements
File Name: August23_KL_Rev5.0.wbpj
(Copied from: "July 1_TommyRev.wbpj")
Notes:
Focused on lowering stresses for Top 30 wall case
Added a total of 12 longitudinal reinforcement tubes to try to add more resistance to bending during impact
all 1” square tubing
Testing the effects of a greater wall thickness (0.113”)
Note: there are currently interferences with floor panels, changes can be made to the reinforcement placement later
...
Stress Results
(not done yet, running into errors - some tubes were split into tiny segments?)
Max Combined Stress (MPa) | ||
Scenario | REV 2.0/3.0? ("July 1_TommyRev.wbpj") | REV5.0 |
B-Pillar | 351.49 | to do |
Side 60 | 648.65 | to do |
Top 30 | 1374.9 | to do |