| Table of Contents |
|---|
...
2. Review Previous Chassis Simulations
I don’t think this is worth the time.
Better to focus on current solution
MS14
MS12
3. Inserting Current Solution into Old FEA Setups
I don’t think this is worth the time.
Better to focus on current solution
4. Sheet Metal Inquiry
I don’t think this is worth the time.
Better to focus on current solution
5. Rev 2.0
Collision Scenario | FEA Meeting (Max S. - MPa) 2 Passenger |
|---|---|
B Pillar | 478 |
Side 60 | 650 |
Top 30 | 1667 |
...
I added a reinforcement in the middle to see if it lowers stresses because it would distribute forces more.
It was found that stresses were the same or increased.
It was also found that some scenarios had the reinforcements suppressed for some reason.
Reconsidering how the fixed boundaries and accelerations are done.
6. Notes for Later
Stackup of A, B, C Bulkheads for Min’s sheet metal solution FEA
Purpose: Put really thin layers in the explorative FEA (step 4)
...