...
**This oven was for the bottom panel not the floor panel, floor panel oven will be much smaller**
Cutouts
It was determined that the 6 individual floor panels that will span the chassis floor is too complex to be cut by hand. To resolve this issue, we plan to make one large panel then use a CNC to cut the shapes of the 6 floor panels. There also need to be cutouts within the 6 panels so interiors can properly mount the seats to the chassis and leave room for the gussets. The image below is a very rough sketch of what the 6 panels look like:
...
Nomex Placement V1
There is no 1” Nomex in the bay that is big enough to cover the entire floor panel layup. We need to break up the Nomex into 3 pieces, ensuring that the cuts in the Nomex do not overlap with one of the 6 panels being cut from the big panel made in the layup process. See picture below to see the placement and measurements for the Nomex.
...