Versions Compared

Version Old Version 11 New Version 12
Changes made by

Sheila Afros

Sheila Afros

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Referencing from (new): Elec / Interiors Dashboard Planning

...

Expand

  • everything in purple we basically need to see on the dash

  • kill switch = red button - something's going wrong, stop the car button

  • p indicator switch = parking indicator switch

    • ignore this, doesn't affect dash

  • there should be a power switch, but not currently on diagram

  • P LED = indicates we're in park

  • already purchased D, N, R, (can鈥檛 remember if there was another button they already have - Renzo Villanoy do you remember which other one they said ?? if not, will ask again)

  • fan control: knobs you can turn to certain point and it clicks on

    • needs to be accessible on the dash for driver and passenger - will be circular holes on the dash for the knobs to poke through

  • AUX, Race/Normal

    • Race mode will turn off infotainment - does not need to be super accessible

      • switching between race/normal ideally similar to switching between eco and non eco mode

    • VEH CAN --> DB9

    • Pi USB --> Type A

    • USB C charger output --> USB C

  • Fault LED --> when that LED is on, activates something outside and also on top of car

  • Fans 1-4 will be mounted on the dash and wiring will run through on the inside

    • fans on old car look similar to ones on a real car - direction control and stuff

    • only fan control needs to be on rn

  • all blue squares are enclosures and all red boxes are connectors which need to fit on enclosures

    • driver display area, infotainment display area easily accessible

  • front electronics enclosure should be accessible but does not need to be EASILY accessible - ie could be unscrewed or smth - don't want it to be a big box like old car

  • there will be slits on the front of the car which will be connected to the fans so there will always be airflow

  • driver display area has 4 screens --> all connects to the steering wheel

    • driver display area should be parallel to driver

  • pedal board enclosure should be waterproof

  • can ignore side lights box

  • kill switch should be flush with car, just needs opening, should not be easily pressed

  • (front driver, front passenger) side misc. --> adrian has ideas for it already, talk to adrian about it

  • basically: we're taking care of pedal board enclosure, front electronics enclosure, infotainment display area, driver display area

June 2021 Meeting with electrical

Dashboard electrical integration meeting

Expand

...

Displays: were we considering 1 for each rear camera

o聽聽 3 displays: large, drive new haven, camera displays the other three (they are smaller)

o聽聽 Dell 7inch displays

路聽聽聽聽聽聽聽 Center display: 15.6 inches https://www.amazon.ca/Anmite-Type-C-Portable-Monitor-Display/dp/B07RDYLTXX/ref=sr_1_20?dchild=1&keywords=15.6+touch+screen+monitor&qid=1614113838&s=pc&sr=1-20

o聽聽 Ports are on the side

路聽聽聽聽聽聽聽 Button enclosure

o聽聽 Wiring to the buttons/led

o聽聽 Put them inside with zip ties and on the edges they all go to central

o聽聽 The sticking out portion maybe retract it a bit

o聽聽

Image Added

o聽聽 Careful with the things sticking out, no protrude (design a cover that is more flush with the enclosure) (more knob)

o聽聽 If you want a logo we can J

路聽聽聽聽聽聽聽 The dcdc convertor in rear

路聽聽聽聽聽聽聽 The auxiliary at the front there will also be a pedal board

路聽聽聽聽聽聽聽 Biggest preference if anything has to be taken out it can all be taken out (mounts are designed by electrical team)

路聽聽聽聽聽聽聽 Steering wheel

o聽聽 New clockspring

o聽聽 fit into the old steering wheel (is it possible to reuse the old wheel)

o聽聽 reuse the stalk

o聽聽 still need a custom wheel part and attach to the stalk

o聽聽 board with button is in grad cad (steering wheel interface)

o聽聽 horn: is it separate another button through the center (just has to be on the wheel) free placement on the wheel (center is best) which button is up to interiors (5/6/7cm diameter button)

o聽聽 might need something a bit smaller

o聽聽 horn input to steering interface board (separate button)

o聽聽 radio push steering interface board

o聽聽 cruise control (button form)

o聽聽 regen brake toggle

o聽聽 through clockspring into the other board in the wheel

o聽聽

Image Added

o聽聽 6 cables routing

路聽聽聽聽聽聽聽 Side lights and cameras

o聽聽 (separate enclosure) wiring to them

o聽聽 module needs to pop vertically out

o聽聽 Mobius cameras https://www.mobius-actioncam.com/packages/mobius2/

路聽聽聽聽聽聽聽 Considered where to place any of the boards (boards will be placed around internal structure of the dash

路聽聽聽聽聽聽聽 Parking brake lever is mounted around the driver

路聽聽聽聽聽聽聽 Are we expecting to have any interior lighting? (not really)

路聽聽聽聽聽聽聽 Ventilation slits in the front of the car for air (still happening not sure where aero has decided to put the cut and routed聽 to the fans using ventilation tubes)

路聽聽聽聽聽聽聽 Must be air intake from outside (re-read regs)

路聽聽聽聽聽聽聽 Pedal enclosure will need another enclosure near there

路聽聽聽聽聽聽聽 CAN debug will also want another enclosure

路聽聽聽聽聽聽聽

Image Added

路聽聽聽聽聽聽聽 Where we can put central console

路聽聽聽聽聽聽聽 Closure switches have shorter routing

路聽聽聽聽聽聽聽