Page Comparison

# set up codegen if you don't have codegen set up, else skip these steps
- cd ~/shared
- git clone https://github.com/uw-midsun/codegen-tooling-msxiv.git
- cd codegen-tooling-msxiv   -
sudo add-apt-repository ppa:maarten-fonville/protobuf
- sudo apt-get update
-
sudo apt-get install protobuf-compiler
-
sudo apt-get install virtualenv
-
virtualenv .venv
- source .venv/bin/activate
-
pip install -r requirements.txt
-
mkdir -p genfiles
-
protoc -I=schema --python_out=genfiles schema/can.proto
-
make gen-dbc
-
deactivate
-
cp system_can.dbc ../system_can.dbc
# set up protobuf-c
-
cd ~/shared
-
git clone https://github.com/protobuf-c/protobuf-c
- cd protobuf-c
- ./autogen.sh
- ./configure
-
sudo apt-get install libprotoc-dev
- make
-
sudo make install
-
sudo ldconfig
# get mpxe requirements
-
cd ~/shared/firmware_xiv
- python3 -m pip install protobuf
-
python3 -m pip install python-can cantools (maybe already have it installed)
-
git checkout mpxe
-
git pull
# run mpxe - pick whichever one you need
-
make mpxe (builds all project dependencies and runs all tests)
-
make mpxe TEST=... (builds all project dependencies, then runs that specific test)
# ^^ the test must be a python file in mpxe/integration_tests, but don't have .py in TEST
-
make fastmpxe (runs all tests, no building)
-
make fastmpxe TEST=... (just runs that test, no building)