Versions Compared

Version Old Version 15 New Version 16
Changes made by

Renzo Villanoy

Renzo Villanoy

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. BB & RE Bottoms (Refer to master CAD)

    1. Mark locations of all ribs and cam covers with masking tape.

...

  •  Lid Latches

  1. Set three of the latches to open CCW and the other three to open CW.the correct orientation for opening/closing. Make sure they are not too loose or tight

  2. Secure the latches to the lid with rubber washers on both sides.

  3. Latches on the left side of the lid will open CCW.

    4. Latches on the right will open CW.

  4. Test opening/closing with a flathead screw

...

  •  Fan Holders

  1. Place fan on the base with the intake side angled downwards and align holes.

  2. Secure the fan to the base with screws from the underside.

...

  1. See instructions on how to properly attach the heat inserts: Heat Set Inserts

  •  Mounting to Chassis
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  • Â