Number | Component | McMaster Part Number | Threading | Quantity |
1 | MSXIV-FSU015-Upright |
|
| 1 |
2 | MSXIV-FSU016-Spindle |
|
| 1 |
3 | UCA Spacer^Front Suspension ASM |
|
| 2 |
4 | LCA Spacer^Front Suspension ASM |
|
| 2 |
5 | CADMIUM-PLATED STL FLEX-TOP EXPANDING LOCKNUT | 94235A090 | M8 x 1.25 mm | 2 |
6 | EXTREME-STRENGTH HEX HEAD SCREW | 91029A109 | M8 x 1.25 mm Thread, 60 mm Long | 2 |
7 | MSXIV-FSU001-LCA |
|
|
|
8 | MSXIV-FSU007-UCA Housing |
|
|
|
Images above are of Upright (#1)
...
Press-fit Spindle (#2) into Upright (#1). Threaded side of the Spindle should pass through upright first with the wider side of the Spindle fitting nicely.
Attach Upright (#1) to the LCA (#7) using Hex Head Screw (#6) x 1, Locknut (#5) x 1, and 2 LCA Spacers (#4). First, orient the spacers, 1 between the upright and LCA the beneath the LCA. Then pass the screw through the spacers and finally attach the locknut to the end of the screw.
Attach Upright (#1) to UCA Housing (#8) using Hex Head Screw (#6) x 1, Locknut (#5) x 1, and 2 UCA Spacers (#3). Like the previous step, insert the spacers between the Upright and the UCA Housing. Then pass the screw through, from the top, and attach to the locknut.
Done
