Measurement of the terminals locations on the array are required for the trunk panel cutouts in CAD. These images should be enough to create the models.
There are a whole bunch of pictures of the array here: https://drive.google.com/drive/folders/1LtQsuNUcKzWY_SHtOL0sYOLA31zQo4_1?usp=sharing
I’ll try and organize them into their relevant sections below. They are labelled in the order in which they are stacked within the packing box.
I don’t know why Confluence doesn’t have a ‘rotate image’ feature, so some of them are not in the best orientations.
Packing:
...
VHB Tape Provided:
...
Stack 1:
...
Stack 2:
...
Stack 3:
...
Stack 4:
...
Stack 5:
...
Stack 6:
...
Stack 7:
...
Stack 8:
...
Stack 9:
...
Stack 10:
...
Stack 11:
...
Stack 12:
...
Stack 13:
...
Stack 14:
...
Stack 15:
...
Stack 16:
...
Thermistor Close-Up:
...
Example of MSXII Solar Array Cutouts in the Trunk Panel:
...