Page Comparison

The link to the ASC webite as well as the most recent ASC 2020 regulations are provided below. Regs that apply to the dashboard have been screenshotted.

https://www.americansolarchallenge.org/regulations/2020-american-solar-challenge-regulations/

Image Added

Image Added

Image Added

Image Added

Image Added

Image Added

Image Added

• everything in purple we basically need to see on the dash

• kill switch = red button - something's going wrong, stop the car button

• p indicator switch = parking indicator switch

  • ignore this, doesn't affect dash

• there should be a power switch, but not currently on diagram

• P LED = indicates we're in park

• already purchased D, N, R, (can’t remember if there was another button they already have - Renzo Villanoy do you remember which other one they said ?? if not, will ask again)

• fan control: knobs you can turn to certain point and it clicks on

  • needs to be accessible on the dash for driver and passenger - will be circular holes on the dash for the knobs to poke through

• AUX, Race/Normal

  • Race mode will turn off infotainment - does not need to be super accessible

    • switching between race/normal ideally similar to switching between eco and non eco mode

  • VEH CAN --> DB9

  • Pi USB --> Type A

  • USB C charger output --> USB C

• Fault LED --> when that LED is on, activates something outside and also on top of car

• Fans 1-4 will be mounted on the dash and wiring will run through on the inside

  • fans on old car look similar to ones on a real car - direction control and stuff

  • only fan control needs to be on rn

• all blue squares are enclosures and all red boxes are connectors which need to fit on enclosures

  • driver display area, infotainment display area easily accessible

• front electronics enclosure should be accessible but does not need to be EASILY accessible - ie could be unscrewed or smth - don't want it to be a big box like old car

• there will be slits on the front of the car which will be connected to the fans so there will always be airflow

• driver display area has 4 screens --> all connects to the steering wheel

  • driver display area should be parallel to driver

• pedal board enclosure should be waterproof

• can ignore side lights box

• kill switch should be flush with car, just needs opening, should not be easily pressed

• (front driver, front passenger) side misc. --> adrian has ideas for it already, talk to adrian about it

• basically: we're taking care of pedal board enclosure, front electronics enclosure, infotainment display area, driver display area