[1] Acrylic
Yield Strength: 64.8 - 83.4 MPa (Average value: 75.4 MPa)
Young’s Modulus: 2.76 - 3.30 GPa Flexural Modulus: 2.96 - 3.30 GPa
Flexural Yield Strength: 98.0 - 125 MPa (Average value: 109 MPa) [2] PETG
Yield Strength: 28.3 - 58.6 MPa
Young’s Modulus: 1.10 - 20.3 GPa (Average value of 2.65 GPa) Flexural Modulus: 1.17 - 2.76 GPa
Flexural Yield Strength: 39.2 - 88.9 MPa (Average value of 69.5 MPa) In short, Plexiglas is a strong enough viable alternative for the side walls of the cover. Gel-coat
Protective finishing layer for composite surfaces.
Leaves a hard smooth surface good for sticking on adhesive.
Requires sanding and buffing for a smooth surface.
If painting the cover, apply gel-coat first then paint over it.
Source:
[1] http://www.matweb.com/search/datasheet.aspx?bassnum=O1303
[2] http://www.matweb.com/search/datasheet.aspx?matguid=4de1c85bb946406a86c52b688e3810d0 | 
