Versions Compared

Version Old Version 2 New Version Current
Changes made by

Emily Guo

Emily Guo

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Attach the rack mount (#3) to the chassis using 2x M6-40 SHCS (#5) using the bottom two holes of #3 and through the holes in chassis.

    Image RemovedImage Added

  2. Slide the rack (#1) so the rod end of the rack sits between the centerlink clevis, attach the rack using 2x M6-40 SHCS (#4) putting it through the middle two holes of the rack and the secure onto top two holes of the rack mount (#3).

    Note: red circled holes are concentric.

  3. Slide 1x #8 and #9 (1.5mm and 2mm ring shims) on each side of the rod end and clevis. Then secure the rack to the clevis using #6 and #7 (M8-45 SHCS and M8 locknut).

  4. Done (smile)

...