...
Part Number | Part Name | Qty |
|---|---|---|
1 | MSXIV-STR004-Rack extension | 1 |
2 | MSXIV-STR010-Clevis | 1 |
3 | Rack mount assem (config 1 and 2) | 2 |
4 | Unthreaded spacers for tube 3/4" | 2 |
5 | MSXIV-STR009-Steering Stops | 2 |
6 | M6 x 1 - 35 SHCS (91290A334) | 2 |
7 | M6 lock nut (94645A205) | 2 |
...
Assembly Instructions
Weld the middle spacer (#4) to the rack extension following the spacer welding section in Rack Extension Welding Jig .
Slide on the left rack mount (#3, config 2), place the mount approximately in the middle of the two spacer holes.
Weld on the left spacer (#4) following the spacer welding portion of Rack Extension Welding Jig again.
Slide on 2x #5 and 1x #3, config 1 in the correct order on the right side of the rack extension. Where the components sit do not matter currently, make sure all three components sit within between the middle spacer (#4) and the rightmost steering stop (#5) hole.
Weld the clevis onto the right side following the clevis welding section of the Rack Extension Welding Jig .
Fix the steering stops to their respective mounting holes using #6 and #7.
Done
