Page Comparison

Here’s a quick diagram of how the charging power line all works out (isn’t it beautiful)

Image Added

The reason for the switch to a new charger is simply for the change into Anderson output 8AWG connector from previous phoenix(?) 14AWG contact connector which required paralleling for current load. We found at FSGP 2019 the cable insulation was melting because of improper paralleling, and was one of the reasons we were considering purchasing a new charger (the new models have the Anderson while the old have the phoenix(?) connectors).

...

Charger part number: HK-J-H198-23 (about 700$)

AC connector: (2.5 square mm wire)

DC connector:  Mating connector is Anderson SB-50. (8AWG)

CAN / 12V connector:  Mating connector is PP0450003. (he CANH and CANL wires are 0.3 square mm and the 12V 5A wires are 0.75 square mm.)

...