Versions Compared

Version Old Version 17 New Version 18
Changes made by

Ivan Cao (Deactivated)

Daphne Lai (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Ownership

...

Task

Status (type “/status”)

Notes

Find the main material for the cover

Status
colourGreen
titlecompleted

Catamaran Cover Materials/Manufacture/Assembly Concepting

Research material specifications

Status
colourGreen
titleCompleted

Hand to Renzo by the end of the week

Clean up detailed design research

Status
colourYellow
title75% done

Check with Adrian on numbers

Manufacturing research

Status
colourYellow
titlein progress

Molds and Manufacturing

Waterproofing

Status
colourYellow
titlein progress

Finishing

Status
colourYellow
titlein progress

Might not be as important EVERYTHING IS IMPORTANT - DAPHNE

Assistance Task List (type “/action item”)

...

Expand
titleMaterial strength of Acrylic (Plexiglas), PETG 3D printed plastics.

[1] Acrylic
Yield Strength: 64.8 - 83.4 MPa (Average value: 75.4 MPa)
Young’s Modulus: 2.76 - 3.30 GPa

Flexural Modulus: 2.96 - 3.30 GPa
Flexural Yield Strength: 98.0 - 125 MPa (Average value: 109 MPa)

[2] PETG
Yield Strength: 28.3 - 58.6 MPa
Young’s Modulus: 1.10 - 20.3 GPa (Average value of 2.65 GPa)

Flexural Modulus: 1.17 - 2.76 GPa
Flexural Yield Strength: 39.2 - 88.9 MPa (Average value of 69.5 MPa)

In short, Plexiglas is a strong enough viable alternative for the side walls of the cover.

Gel-coat
Protective finishing layer for composite surfaces.
Leaves a hard smooth surface good for sticking on adhesive.
Requires sanding and buffing for a smooth surface.
If painting the cover, apply gel-coat first then paint over it.

Source:
[1] http://www.matweb.com/search/datasheet.aspx?bassnum=O1303
[2] http://www.matweb.com/search/datasheet.aspx?matguid=4de1c85bb946406a86c52b688e3810d0

...