...
Top lights will be mounted to the roof panel, with a panel-mounted 8 pin MX150L also connected to the roof, in the same plane as the
Tail lights will be panel mounted to the tail light enclosure.
The MX150Ls are only waterproof on the plug side not on the panel mounted side,so we might want to consider placement a little more closely near the trunk lines.
~6” from the back edge of the car to get a 3cm height for the MX150Ls.
Proposal Aug 2, 2020
Note - we may switch to just having 1 BPS strobe (not alternating) but the most pins we would require is 8 using the configuration shown, so protecting for that.
...