the reason for the switch to a new charger is simply for the change into anderson output 8AWG connector from previous phoenix(?) 14AWG contact connector which required paralleling for current load. We found at FSGP 2019 the cable insulation was melting because of improper paralleling, and was the reason for moving to the new charger.
Charger part number: HK-J-H198-23 (about 700$)
AC connector: (2.5 square mm wire)
DC connector: Mating connector is Anderson SB-50. (8AWG)
.jpg?version=1&modificationDate=1577372036575&cacheVersion=1&api=v2)
CAN / 12V connector: Mating connector is PP0450003. (he CANH and CANL wires are 0.3 square mm and the 12V 5A wires are 0.75 square mm.)
| View file | ||||
|---|---|---|---|---|
|
| View file | ||||
|---|---|---|---|---|
|
...