...
<insert test table>
Output Voltage sense
We take our own measurements for output voltage sense, and to do so for this test we will connect one MPPT output to the 6th channel as done in the above SPI testing. The MPPT also has to be connected to an E-load, and will basically have taps that go to this board. We will want to vary the voltage input of the power supply so that we get the expected stable output each time from the MPPT when the input is within operation range.
Make sure you have the same parts populated as in the above SPI testing, as it includes the parts needed for the voltage sense.
Use the following space to record findings:
<insert test table>
Part 2: HV/Series MPPT Testing
...