Page Comparison

...

1. Heat gun for rework

2. Agilent Power Supply

   1. The red and black alligator clips, or at least banana:alligator clipsbanana - alligator clips

   2. ultra-fit power connection

3. Weller Soldering Iron

   1. Solder, flux

   as well

   1. , copper braid, solder tips,

   solder braid cleaner

   1. brass sponge, solder paste,

   kaptone

   1. kapton tape

4. Tweezers and Exactoknife

5. Controller Boards, parts, and stencilsstencil, we should have parts for 30.

   1. The rev from JLC PCB with the pick and place panel, and the solder paste scraper blade

6. MPPTs x2 (18-33V)

7. SWD adapters + programmers (Grab box of firmware stuff)

8. Raspberry Pi 3B+, Micro SD Cards, etc.

9. DCDC push pins, heat sink (might have to take off of old DCDC) and vicor module

   Take entire DCDC board (Rev 1)

   DC-DC Rev 1 box from on top of the electrical shelf

10. PEAK CAN-USB adapter