...
At the moment, the car is charged using an EVSE charger which complies with the J1772 standard.
Our end goal is to draw power and feed into our Elcon charger. In doing so, we have purchased the female connection port to the flo G5 Level 2 charger shown above. More information regarding the Elcon charger can be found here Charger Interface Board: MS 14 :
...
The control pilot and proximity detection lines are to be crimped to an Ultrafit connector and attached to the charger interface board
...
Elcon Charger Input
It The three lines feeding from the female EVSE port is connected using an AC connector. , 2.5 square mm wire.
...
Match the connections from left to right with the L, Chassis Ground, and N connections respectively mentioned above.
...
We are currently using a level 2 charging arrangement so MSXIV is within regulation.