Page Comparison

...

I again found the MX150L tools and parts on Digikey and made a table on the same excel sheet displaying their Digikey and Molex part numbers.

...

I am still adding finishing touches to the excel sheet, but will upload it here after I am done with it!

Digikey and Molex part numbers for the following:

...

After some discussion, it was concluded that through-hole flanges will be used as opposed to no flange or rear mount flanges. Additionally, gold pins were prioritized but weren’t available for pins below 14 AWG. Cavities are used for filling in blank spaces in the plugs, but I don’t believe there are any. Additionally, I believe that we have all the tools that we need for crimping the wires so I didn’t include them in the excel file. (pls tell me if I am wrong about it)

Here are the Digikey Links for the materials.

Receptacles and Plugs- https://www.digikey.ca/products/en/connectors-interconnects/rectangular-connectors-housings/319?k=mx150l&k=&pkeyword=mx150l&sv=0&sf=0&FV=-8|319&quantity=&ColumnSort=0&page=1&stock=1&pageSize=25

Pins- https://www.digikey.ca/products/en/connectors-interconnects/rectangular-connectors-contacts/331?FV=-8|331&quantity=0&ColumnSort=0&page=1&stock=1&k=mx150l+pin&pageSize=25&pkeyword=mx150l+pin

The excel file of all the connections (if it's too confusing msg me on slack)

The diagram of the enclosures and the connections between them-

Coming Soon!