...
Responsibilities
| Order Responsibility (PCBs) |
| TBD |
|---|
| Order Responsibility (Components) |
| DigikeyDigikey/Mouser (send cart links to UW procurement) |
|---|
Boards
| Board Sent | Rev | Person Responsible | Layers | Color | Gerber File (upload as Zip) | #Boards to purchase components for | Note |
|---|
| MSXIV BMS Carrier | 1.1 | | 2 | Blue | | View file |
|---|
| name | Fabrication Files.zip |
|---|
| height | 250 |
|---|
|
| 1 | Forgot to send in Dec |
|---|
| MSXII Precharge/MCI | 5.0 | | 2 | Black | | View file |
|---|
| name | Motor_Interface_PreCharge_Rev5.0.zip |
|---|
| height | 250 |
|---|
|
| 0 (Already Purchased) | Forgot to send in Dec |
|---|
MSXIV Solar Master/Sense | 1.0 | | Black | 1 | MSXIV BMS AFE | 1.0 | | 4 | Blue | | View file |
|---|
| name | Fabrication Files (1).zip |
|---|
| height | 250 |
|---|
|
| 4 | | MSXIV Center Console | 1.0 | | 2 | Green | | View file |
|---|
| name | Center Console_3.0.zip |
|---|
| height | 250 |
|---|
|
| 1 | Sending the same board as last time (ordering 5) because nothing actually changed other than labeling of 2 nets. The PCB layout was messed up because after ordering the boards last term, the files were pushed to git but the pcb layout wasn't saved properly and thus looks incomplete. |
|---|
| MSXIV Power Distribution Front | 1.0 | | Red | 1 | Controller Board Panel | Green | | View file |
|---|
| name | Controller_Board_Panel_Gerber.zip |
|---|
| height | 250 |
|---|
|
| 24 | Each panel has 6 controller boards. The pick and place files are on the branch for now. | Lights Board | White | n/a | 7 | Boards already purchased, need other current limiting resistor values, and LED colors - ask NitaBOM (xlsx) | Octopart/Digikey/Mouser BOM link | #Boards to purchase components for | Note |
|---|
| Lights Driver Board |
|
|
|
|
|
|
|
|
|
|---|
| Lights LED Board |
|
|
|
|
|
|
|
|
|
|---|
| Power Selection Board |
|
|
|
|
|
|
|
|
|
|---|
| Battery Module Connector |
|
|
|
|
|
|
|
|
|
|---|
| DC-DC |
|
|
|
|
|
|
|
|
|
|---|
Other Notes
We should not need to purchase any additional resistors/capacitors unless they are new to the library.